MOTOROLA MVME167-032A Thermocouple input card

The ladder logic program reads the desired Central System Time value from the PLC using a GSV instruction. The Destination tag must consist of at least two DINT registers. 2. If desired, add the amount of time, in microseconds, that you want to “look ahead” to the lower word of Central System Time. 3. Write the desired Central System Time value into the Interpolation CST Value Output Register. 4. Based on the state of the Interpolation Acknowledge bit, toggle the Interpolation Command bit either on or off

Based on the measured Velocity for the corresponding SSI channel

the 7264 module calculates the Interpolated Data Value and places it in the respective Input Register. The 7264 module then adjusts the Interpolation Acknowledge Bit accordingly. 6. If desired, the user can send the Interpolated Position, along with the system time, to another ControlLogix module each time the Interpolation Acknowledged bit changes state. The following is an example of the ladder logic that can be used to generate the Interpolation Data Value.

                                                                        

Advantage products

We mainly make spare parts for DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: professional off production accessories,

Fast delivery, accurate delivery time,

Main brands include ABB, GE/FANC, FOXBORO, TRICONEX, BENTLY NEVADA, A-B, EMERSON, OVATION, MOTOROLA, XYVOM, HONEYWELL, REXROTH, KUKA, NI, DEIF, Reliance Electric, Yokogawa, WOODWARD, SCHNEIDER, MOOG, PROSOFT and other brands

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/