MOTOROLA MVME167-035B Switch input card

Configuration Mode ENTER shows the type and version of the communication driver stored in the unit (if any) and boot FW version. ENTER 2 s returns to Operation Mode if a valid communication driver and a valid project are stored in the unit (the key must be pressed for 2 seconds) CLEAR 2 s Call standard touchscreen calibration procedure; only for panels with touchscreen Update firmware; only for units with firmware type 58, 60 (“B” series), 70 (“C” series.
2 s Erase Static RAM (Password and Recipe reset)

Operation Mode/Page Mode

To recall the Configuration Mode for touchscreen units without any key, touch the screen in an area where no active touch areas have been defined and hold for 2 seconds. The value of 2 seconds can be changed with Designer When in Data Entry Mode the meaning of the keys changes depending on whether a field has been selected for Data Entry or not. A field is selected when The Data Entry procedure has been started on that field. If not field has already been selected for Data Entry, the key assignment is shown in the table below.

                                                                        

Advantage products

We mainly make spare parts for DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: professional off production accessories,

Fast delivery, accurate delivery time,

Main brands include ABB, GE/FANC, FOXBORO, TRICONEX, BENTLY NEVADA, A-B, EMERSON, OVATION, MOTOROLA, XYVOM, HONEYWELL, REXROTH, KUKA, NI, DEIF, Reliance Electric, Yokogawa, WOODWARD, SCHNEIDER, MOOG, PROSOFT and other brands

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/