MOTOROLA MVME705A-001 Pulse output module

Make sure that the servo amplifier and motor are properly earthed. Run power and control cables separately. Recommended distance is more than 20 cm to improve compliance with the limits specified by the EMC regulations. Install all power cables with an adequate cross-section according to EN 60204. A tabular summary of the recommended cross-sections can be found in Chapter I.8.2 . Use a motor choke box (3YL-06) and a 4x1mm² motor cable if your motor cable is longer than 25m (see chapter I.11). If a motor power cable is used with integrated brake control leads, then the brake control leads must be shielded separately. The shield must be connected at both ends

Loop the BTB contact into the safety circuit of the system.

 Only so can the monitoring of the servo amplifier be ensured. Carry out all shielding with large areas (low resistance), using metallised connector housings where possible (see II.2.1 ff). Notes on connection methods can be found in Chapter II.2.6 . Ensure an adequate supply of filtered cool air in the switchgear cabinet, fed from below. Refer to Chapter I.8.1 . If the ballast power exceeds 75W, you have to use forced cooling (digifas™ 7206, -BV-) Alterations in the servo-amplifier settings by means of the operator software are permitted. Any additional tampering with the equipment will invalidate the guarantee.

                                                                        

Advantage products

We mainly make spare parts for DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: professional off production accessories,

Fast delivery, accurate delivery time,

Main brands include ABB, GE/FANC, FOXBORO, TRICONEX, BENTLY NEVADA, A-B, EMERSON, OVATION, MOTOROLA, XYVOM, HONEYWELL, REXROTH, KUKA, NI, DEIF, Reliance Electric, Yokogawa, WOODWARD, SCHNEIDER, MOOG, PROSOFT and other brands

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/