MOTOROLA MVME712-103 Thermal resistance card
Shield connection by stranded cable: Strip off an individual core (e.g. H05V-K 1mm²). Wind the bared strands around the shielding braid and solder it carefully to the braid, without overheating the plastic outer insulation. Shielding terminal clamp: Not applicable, see Chapter II.2.6.1 Strip off the individual cores over a length of 10mm, without damaging the copper strands. Put wire end ferrules over the ends of the cores. Use heatshrink sleeving to insulate the braiding
Using motor cable without brake (amplifier side)
Push back the bare shielding braid over the outer insulation. Strip off about 110mm of the inner insulation (pos. 2), taking care not to damage the individual cores. Cut back the individual cores 1, 2 and 3 to a length of 110mm.Insulate the back portion with heatshrink sleeving (pos. 3). Use heated air for shrinking. Strip off the individual cores over a length of 10mm, without damaging the stranded copper.
We mainly make spare parts for DCS, PLC, robot control system and large servo system.
Main products: various modules/cards, controllers, touch screens, servo drives.
Advantages: professional off production accessories,
Fast delivery, accurate delivery time,
Main brands include ABB, GE/FANC, FOXBORO, TRICONEX, BENTLY NEVADA, A-B, EMERSON, OVATION, MOTOROLA, XYVOM, HONEYWELL, REXROTH, KUKA, NI, DEIF, Reliance Electric, Yokogawa, WOODWARD, SCHNEIDER, MOOG, PROSOFT and other brands
This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/