MOTOROLA MVME721-101 Output expansion card

The following instructions should help you to follow a sensible installation sequence without endangering personnel or machinery. see Chapter II.2. De-energize the servo amplifier. 0V on terminal X3/16 24V DC on terminal X1/1 and ground on terminal X1/2 The green LED light up after the initialisation sequence (approx. 0.5s) (see Chapter I.8.4) See operating manual for the operator software BS7200. The parameters which are stored in the SRAM of the servo amplifier are transferred to the PC.

without CONNECT module:

 on terminal X3/1-2, with CONNECT module: function “const. speed” with n = 0min-1 24V DC on terminal X3/16, motor is stopped with standstill torque without CONNECT module installed : - analog setpoint, recommended 0.5V on terminal X3/1-2 with CONNECT module installed : - carry out “REVERSING MODE” function in the “SERVICE” menu, with the given default values (reversing at 100 rpm, change direction every 0.5s) If the motor oscillates, this is dangerous for the motor ! The Kp parameter in the “Speed” must be reduced. for speed and current controllers, see BS7200 operating manua

                                                                        

Advantage products

We mainly make spare parts for DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: professional off production accessories,

Fast delivery, accurate delivery time,

Main brands include ABB, GE/FANC, FOXBORO, TRICONEX, BENTLY NEVADA, A-B, EMERSON, OVATION, MOTOROLA, XYVOM, HONEYWELL, REXROTH, KUKA, NI, DEIF, Reliance Electric, Yokogawa, WOODWARD, SCHNEIDER, MOOG, PROSOFT and other brands

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/