MOTOROLA MVME147-11 input card

Our applications department can help you with commissioning. Preparation 

— switch off the supply voltages 

— detach plug X4 from the servo amplifier 

— check LB1 (final speed), change solder link if necessary 

— set enable signal to 0V 

— switch on aux. voltage 25V DC and PC, start operator software BS7200

Setting parameters 

— set parameter “ROD resolution” to 1024 incr./turn 

— adjust parameter “Final limit speed” to the setting of LB1 

— set parameter “I/O” to 1:1 control 

— set parameter “Ramp +” to 2ms

 — set parameter “Ramp –” to 2ms 

— store the parameter set in the EEPROM 

— switch off the 25V DC aux. voltage Optimization 

— connect plug X4 to the servo amplifier, switch on the voltages — optimization : offset adjustment with potentiometer P303 AC gain adjustment with potentiometer P305 continue in the same way as the corresponding description in the BS7200 manual.

                                                                        

Advantage products

We mainly make spare parts for DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: professional off production accessories,

Fast delivery, accurate delivery time,

Main brands include ABB, GE/FANC, FOXBORO, TRICONEX, BENTLY NEVADA, A-B, EMERSON, OVATION, MOTOROLA, XYVOM, HONEYWELL, REXROTH, KUKA, NI, DEIF, Reliance Electric, Yokogawa, WOODWARD, SCHNEIDER, MOOG, PROSOFT and other brands

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/