MOTOROLA MVME162-531A Sequence control card

After pressing the Target Flame Select button in Step 2, the current parameter setting will be displayed. The user may increase or decrease the setting by pressing the UP or DOWN buttons (Reference Table 9 for parameter increments and corresponding LED displays). Once the desired setting is entered, press the Background Flame Select button to save the setting in temporary memory and exit back to the parameter select menu. If programming additional parameters is desired, continue to the next parameter using the UP or DOWN buttons and program the parameter as previously discussed.

Saving or Discarding Parameter Settings 

To SAVE the modified parameters to permanent memory and EXIT this mode, press and hold the Background Flame Select button for at least 2 seconds. NOTE: Changes to the parameters will NOT be stored unless valid flame data is already present in the scanner's permanent memory. Either a flame must have been previously learned or the Default Profile must have been loaded. To DISCARD any changes to these parameters, press the Background Flame Select and Target Flame Select buttons simultaneously. This will discard all parameter changes while remaining in the program mode. To DISCARD any changes and EXIT the mode, press and hold the Background Flame Select and Target Flame Select buttons down for at least 2 seconds.

                                                                        

Superior products

-ABB Accuray

--ABB Advant OCS

--ABB Advant-800xA

--ABB H&B Contrans T

--ABB H&B Freelance 2000

--Allen Bradley PLC

--GE Ran card machine accessories,PLC

--ICS Triplex Rockwell T8151B/T8461/T8310

--Triconex/Foxboro:3625/3721/3503E/FBM237/FBM242

--Emerson:CE3008/VE3008/SE3008/A6120/A6312

--Motorola:MCP750/MVME162/MVME2604/MVME5100

--Woodward:9907-164/9907-167/9905-144/9905-018

The company is mainly engaged in above brands. You are welcome to inquire from me via email!

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/