MOTOROLA MVME172-373 CPU card

Dangerous movements can be caused when units have bad interfaces or motors are connected incorrectly. There are various causes of dangerous movements: 

• Improper or incorrect wiring or cable connections 

• equipment is operated incorrectly 

• probe parameters or encoder parameters are set incorrectly 

• malfunctioning components 

• errors in software or firmware

Protection against dangerous movements

Dangerous movements can occur immediately after equipment is switched on or even after an unspecified time of trouble-free operation. Although the monitoring circuits in the drive components make improper operation almost impossible, personnel safety requires that proper safety precautions be taken to minimize the risk of personal injury and/or property damage. This means that unexpected motion must be anticipated since safety monitoring built into the equipment might be defeated by incorrect wiring or other faults.

                                                                        

Superior products

-ABB Accuray

--ABB Advant OCS

--ABB Advant-800xA

--ABB H&B Contrans T

--ABB H&B Freelance 2000

--Allen Bradley PLC

--GE Ran card machine accessories,PLC

--ICS Triplex Rockwell T8151B/T8461/T8310

--Triconex/Foxboro:3625/3721/3503E/FBM237/FBM242

--Emerson:CE3008/VE3008/SE3008/A6120/A6312

--Motorola:MCP750/MVME162/MVME2604/MVME5100

--Woodward:9907-164/9907-167/9905-144/9905-018

The company is mainly engaged in above brands. You are welcome to inquire from me via email!

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/