MOTOROLA MVME172P-642LSE Analog output module

Thermal conditions can cause the flange side of the output shaft to shift in contrast to the motor housing by up to 0.6 mm. The use of drive pinions or bevel gear pinions mounted directly to the output shaft means that this change in length could lead to • a position shifting of the axis if the drive pinions are not axially mounted to the machine

Bearing service life L10h

If the allowed radial and axial forces are not exceeded, then it applies to the nominal bearing service lifespan: L10h = 30,000 operating hours (computed per ISO 281, ed. 12/1990).

• to a thermally-dependent component of the axial force if the drive pinions are axially mounted to the machine. This means that the maximum allowed axial force could be exceeded or the play within the gear teeth could be increased to unacceptable levels. It is therefore advisable to use own-supported drive elements connected to the motor shaft with compensating coupling units!

                                                                        

Superior products

-ABB Accuray

--ABB Advant OCS

--ABB Advant-800xA

--ABB H&B Contrans T

--ABB H&B Freelance 2000

--Allen Bradley PLC

--GE Ran card machine accessories,PLC

--ICS Triplex Rockwell T8151B/T8461/T8310

--Triconex/Foxboro:3625/3721/3503E/FBM237/FBM242

--Emerson:CE3008/VE3008/SE3008/A6120/A6312

--Motorola:MCP750/MVME162/MVME2604/MVME5100

--Woodward:9907-164/9907-167/9905-144/9905-018

The company is mainly engaged in above brands. You are welcome to inquire from me via email!

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/