MOTOROLA MVME328S-1 Embedded controller

Coolant lines are available as either • pipe lines or as • hose/ duct systems. Note: Due to the points of deviation, which unavoidably occur in pipeline systems (e.g., a 90° knee), there is considerable loss of pressure in the lines. We thus recommend hose/duct systems. When selecting cooling lines, please take the pressure drop within the system into account. With greater lengths, the inside diameter of the lines should equal at least 9 mm and grow narrower when reaching the point of connection at the motor.

Pressure drop

The coolant flow in the drive component is subject to the cross section of the lines and any directional changes. This means that friction and deviation losses occur. These losses are articulated in the form of a pressure drop ∆p. Pressure drop ∆pn of liquid-cooled motors is specified in the technical data. It references the specified amount of flowthrough of the coolant water. If the flowthrough amount is computed with a different increase in temperature, then the resulting pressure drop is illustrated in the following characteristic curve.

                                                                        

Superior products

-ABB Accuray

--ABB Advant OCS

--ABB Advant-800xA

--ABB H&B Contrans T

--ABB H&B Freelance 2000

--Allen Bradley PLC

--GE Ran card machine accessories,PLC

--ICS Triplex Rockwell T8151B/T8461/T8310

--Triconex/Foxboro:3625/3721/3503E/FBM237/FBM242

--Emerson:CE3008/VE3008/SE3008/A6120/A6312

--Motorola:MCP750/MVME162/MVME2604/MVME5100

--Woodward:9907-164/9907-167/9905-144/9905-018

The company is mainly engaged in above brands. You are welcome to inquire from me via email!

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/