MOTOROLA MVME162-512 Matrix switch card

To ensure a proper functioning of the holding brake check the holding torque of the brake prior to installation. If the holding torque specified in the data sheets is not achieved then the it is necessary to regind the brake. To do this it is necessary to remove all connections between motor and drive controller, e.g., power and feedback cables. ⇒ Make sure that the motor is not electrically connected to the drive controller. ⇒ Turn the motor shaft in comparison to the motor housing with the holding brake closed for approximately 50 rotations. The holding brake can now be used.

Maintenance

The following should be performed regularly after the first year: • The motors should be cleaned of dust, chips or similar. 

• Control motor blower of the surface cooling unit. 

• Check air circulation of cooling units. 

• Check liquid cooling units for pressure, coolant levels, flow and so on.

                                                                        

Superior products

-ABB Accuray

--ABB Advant OCS

--ABB Advant-800xA

--ABB H&B Contrans T

--ABB H&B Freelance 2000

--Allen Bradley PLC

--GE Ran card machine accessories,PLC

--ICS Triplex Rockwell T8151B/T8461/T8310

--Triconex/Foxboro:3625/3721/3503E/FBM237/FBM242

--Emerson:CE3008/VE3008/SE3008/A6120/A6312

--Motorola:MCP750/MVME162/MVME2604/MVME5100

--Woodward:9907-164/9907-167/9905-144/9905-018

The company is mainly engaged in above brands. You are welcome to inquire from me via email!

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/