The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

product Are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronics manufacturing, automobile manufacturing, tobacco, plastics machinery, electric power, water conservancy, water treatment/environmental 

METSO IOP331 Servo module

Removing Power from the System Before performing most setup or maintenance tasks, use the following procedure to ensure that power has been removed from the system. 1. Use the operating system to power down the system, following the on-screen prompts. 2. After the system has completely shut-down, carefully grasp the head of the power cord and gently pull it out of the back of the power supply. 3. Disconnect the cord from the power strip or wall outlet

1. Power down the system and remove the power cord from the rear of the power supply as described in Section 5-2. 2. Remove the five screws that hold the chassis cover in place.There are two screws on each side of the chassis, and one screw on the back. 3. Once the screws have been removed, lift the cover upward to remove it from the chassis. Warning: Except for short periods of time, do not operate the server without the cover in place. The chassis cover must be in place to allow proper airflow and prevent overheating.

   Installing a Fixed 3.5" Hard Drive

2. The 3.5" hard drive screws directly into the chassis. 1. Power down the system and remove the power cord from the rear of the power supply as described in Section 5-2. and remove the chassis cover. 2. Place the 3.5" hard drive in the chassis as illustrated above. 3. Secure the hard drive to the floor of the chassis using the four screws provided.The 2.5" hard drives (1) must be installed in their brackets (2) before they are screwed into the chassis. 1. Power down the system and remove the power cord from the rear of the power supply as described in Section 5-2. and remove the chassis cover 2. Insert 2.5" hard drives into the hard drive brackets. 3. Secure the 2.5" hard drives to the brackets with the screws provided. 4. Place the hard drive bracket in the chassis as illustrated above. 5. Secure the hard drive bracket to the floor of the chassis using the four screws provided.