MOTOROLA MVME320B-1 Ethernet interface module

Never power the servo drive with the cover removed or with anything attached to circuitry inside the cover. If the drive must be removed from the cabinet, wait at least five minutes after turning off power before removing any cables from the drive or removing the drive from the mounting panel. Never connect or disconnect any wiring to the drive while power is applied. Always power down and wait five minutes before connecting or disconnecting any wires to the terminals. Avoiding Burns The temperature of the drive’s heat sink and housing as well as an external regen resistor can exceed 70° C. Therefore, there is a danger of severe burns if these regions are touched.

Preventing Damage to the Drive

 Follow these guidelines to prevent damage to the servo drive during operation: z Never plug or unplug connectors with power applied. z Never connect or disconnect any wires to terminals with power applied z Never plug or unplug an option card with control power applied z If the drive indicates a fault condition, find the cause of the fault and fix it prior to resetting the fault or power-cycling the drive.

                                                                        

Superior products

Main products include DCS control system spare parts, PLC system spare parts and robot system spare parts,Advantage brands: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, B&R, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft and other imported industrial parts

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/