MOTOROLA MVME3604-1131 Counter card

Attach the conductive clamps to PE on the front of the drive. 5. Remove about 10mm (0.5”) of the outer jacket of these cables where the clamp will be to expose the braided shield before inserting under the clamp and tightening. The length of the cable between the drive connection and the clamp should be as short as possible (not exceeding 0.6 meters or two feet). If a ground plane is available at the other end of these cables, use a conductive clamp at that end to connect the shield to that ground plane as well. 6. Provide a minimum unobstructed space of 100 mm (4”) above and below the drive. With convection cooling, provide 40mm (1.6”) free space on either side of each unit. With forced air cooling, no free space is required on either side of each unit.

The PC830 packaging is totally enclosed single axis panel mount.

 The next figure gives the key dimensions for use in physically mounting the product. When mounting multiple units on one panel there should be at least 20 mm (0.75") of air space on the sides and 40 mm (1.5") or air space above and below the unit. When mounting multiple drives in a row, the stiffness of the drive and the mounting panel may be too low. To increase the mounted mechanical integrity, connect to the threaded insert on the top front edge. The overall drive panel dimensions and the mounted depth, not including mating connectors, is listed in the below chart. The extra depth for mating connectors is 1.0" or less

                                                                        

Superior products

Main products include DCS control system spare parts, PLC system spare parts and robot system spare parts,Advantage brands: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, B&R, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft and other imported industrial parts

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/