The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

UR6AH relay

MODEL DESIGNATION AND SPECIFICATIONS This section provides model designation information, lists of controller accessories and service parts, detailed controller specifications and hazardous area installation information. IMPORTANT Before installing or servicing a controller, refer to the controller labels and the applicable specifications and hazardous area classifications in this section to ensure that the correct model with the needed certifications is at hand. Every controller is identified by several labels. Labels are located on the case and inside the drop-down door on the Display Assembly, as shown in Figure 1-1. Typical labels are shown below.

14.1 MODEL DESIGNATION Table 14.1 shows the controller’s model number sequence. The model designation is shown on a nameplate on the top of the case. The nameplate and other labels carry important information about the controller, such as Model Number, Bill of Material number (P/N No.), Serial Number, and Certifications. IMPORTANT Confirm a controller’s model number and hazardous area certifications before installing, applying power, or servicing. When circuit boards are added to a controller in the field, nameplate information will not reflect the current physical configuration.

COMMUNICATION BOARDS 

Communication boards plug into the Controller Board and provide digital communication as required by the application. These boards provide digital communication for remote I/O and NETWORK communication for interstation/workstation/APACS networking. Three communication boards are designed to plug into the MPU controller board: a LonWorks board and either a LIL Network board or an Ethernet board. 14.8.1 LonWorks Board This board provides for additional I/O, remote from the Moore 353. The communication method allows various configurations of analog and discrete signal types, both input and output, for use in control and/or sequencing applications within the station. 14.8.2 LIL Network Board (Local Instrument Link) This board provides network communication, mapping station variables to the standard LIL channel/parameter communication map. When this board is used, neither Modbus nor Ethernet communication are available. The local configuration port under the faceplate is still available for configuration and diagnostic applications. 14.8.3 Ethernet Board This board provides Ethernet communications. It function as a bi-directional Modbus-Ethernet converter. When installed, neither LIL nor Modbus communications are available. The local configuration port under the faceplate is still available for configuration and diagnostic applications