GE DS200TBCAG1AAB Overspeed detection module

Short Circuit Waveform Typical short circuit waveforms are shown in Figures 2A and 2B. The parameters Ips (peak current), tr (pulse rise time), td (pulse decay time) and IR (ringing) are determined from this waveform. Ringing may prevent the simple determination of Ips. A graphical technique for determining Ips and IR is described in Section 5.2.3.3 and Figure 4. 5.2.3.2 500 Ohm Load Waveform A typical 500 ohm load waveform is shown in Figure 3. The parameters Ipr (peak current with 500 ohm load) and trr (pulse rise time with 500 ohm load) are determined from this waveform.

Graphical Determination of Ips and IR 

5.2.3.3.1 A line is drawn (manually or using numerical methods such as least squares) through the HBM ringing waveform from tmax to tmax + 40 ns to interpolate the value of the curve for a more accurate derivation of the peak current value (Ips). tmax is the time when Ipsmax occurs (see definition for tmax in Section 3 and Figure 2A). 5.2.3.3.2 The maximum deviation of the measured current above the straight line fit is Ring1. The maximum deviation of the measured current below the straight line fit is Ring2.

Our products

A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/