GE DS200TCDAG1BDB Dynamic pressure monitor

Test Fixture Board, Socket and Pins Use the highest pin count test fixture board with a positive clamp socket for the tester waveform verification or the recommended Waveform Verification Board provided by the manufacturer. The reference pin pair(s) of the highest pin count socket on the board shall be used for waveform capture. Waveforms from every pulse generating circuit are to be recorded. Electrical continuity for all pins on the test fixture board shall be verified prior to qualification testing. This can typically be done using the manufacturer’s recommended self-test.

Short Circuit Waveform Capture

 a. Configure the test fixture board, shorting wire, and transducer for the short circuit waveform measurement as described in Section 5.2.2.1. 

b. Apply five positive and five negative pulses at each test voltage. Record waveforms at 1000, 2000 and 4000 volts. Verify that the waveforms meet all parameters specified in Figures 2A and 2B and Table 1.

Our products

A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/