GE DS200TCQBG1BBA Communication gateway module

Tester Waveform Records 5.7.1 Tester and Test Fixture Board Qualification Records Retain the waveform records until the next re-qualification or for the duration specified by the user’s internal record keeping procedures. 5.7.2 Periodic Waveform Check Records Retain the periodic waveform records at least one year for the duration specified by the user’s internal record keeping procedures

High Voltage Discharge Path Check 

This test is required for either routine check method (Section 5.5). Test the high voltage discharge and grounding paths and all associated circuitry at the beginning of each day during which ESD stress testing is performed. The period between self-test diagnostic checks may be extended, providing test data supports the increased interval. Use the tester manufacturer's recommended procedure. If any failure is detected, do not perform device testing with the sockets that are connected to the defective discharge paths. Repair the tester and then verify that the failed pins pass the self-test before resuming testing. Depending on the extent of the repair it may be necessary to perform a complete re-qualification according to Section 5.3.1.

Our products

A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/