MOTOROLA MVME133A-20 Thermocouple output module

Any pin that is intended to be pumped above the positive supply or below the negative supply of its circuit block shall be treated as a supply pin (example: positive and negative terminal pins connected to a charge pump capacitor). Any pin that is connected to an internal power bus (or a power pin) by metal as described in Section 6.3.2 shall be treated as a supply pin (example: a Vdd sensing pin). Any pin that is intended to supply power to another circuit on the same chip must be treated as a supply pin. However, if a pin is intended to supply power to a circuit on another chip but not to any circuit on the same chip, it may be treated as a non-supply pin.

No-Connect Pins

 Pins labeled as no-connect pins but found to have an electrical connection to the die shall be tested as non-supply pins. Verified no-connect pins must not be stressed and must be left floating at all times. 6.5 Non-Supply Pins All pins not categorized as supply pins or no connects are Non-Supply Pins. This includes pins such as input, output, offset adjusts, compensation, clocks, controls, address, data, Vref pins and VPP pins on EPROM memory. Most non-supply pins transmit information such as digital or analog signals, timing, clock signals, and voltage or current reference levels.

Our products

A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/