The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, machinery, electronics, automobile manufacturing, tobacco, plastics machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution and so on.

NI GPIB-140A total line expander

1 km, total line expander - GPIB GPIB - 140 - a GPIB system of wire rope can be extended by a km, and will not affect the integrity of the GPIB, no need to modify the software. The fittings used buffer transmission technology, data transmission rate is as high as 1.1 Mb/s (IEEE 488.1) or 2.8 Mb/s (HS488). GPIB - 140 - a GPIB equipment can also be GPIB system maximum number increased from 15 to 26.

Connecting HMIs or Laptops 

HMIs, e.g., XI582 or XI882A, can be connected via the HMI interface of the XCL8010 Controller Module. Laptops can be connected via the HMI interface or via the LONWORKS interface of the XCL8010 Controller Module. Connecting the XI582 Operator Interface ► Connect the XI582 Operator Interface to the HMI interface of the XCL8010 Controller Module by means of – the XW882 cable or – the XW582 cable connected with an XW586 cable. For mounting details, refer to the XI582 Installation Instructions (Product Literature no.: EN2B-0126GE51). For cable details, refer to section "Preconfigured Connection Cables" on page 11. Connecting the XI882A Operator Interface ► Connect the XI882 Operator Interface to the HMI interface of the XCL8010 Controller Module by means of – the XW882 cable or – the XW586 cable connected with an XW585 cable. For cable details, refer to section "Preconfigured Connection Cables" on page 11. Connecting Laptops (XL-Online/CARE) ► Connect a laptop (on which e.g., XL-Online or CARE has been installed) to the HMI interface or to the LONWORKS interface of the XCL8010 Controller Module by means of – the XW885 cable or – the XW585 cable connected with an XW586 Cable. For cable details, refer to section "Preconfigured Connection Cables" on page 11.

Connecting Modems 

An Excel 800 System can be connected to a modem or an ISDN terminal adapter via the Modem Interface of the XCL8010 Controller Module by means of the XW586 cable. ► Connect the RJ45 female connector of the XW586 cable to the modem interface of the XCL8010 Controller. ► Connect the 9-pin sub-D connector to the modem. For cable details, refer to section "Preconfigured Connection Cables" on page 11. Refer to Appendix 2 for details regarding remote communication.How to Shield In principle, data transmitting cables should be shielded in case of RFI. ► On the controller side, connect the shield to terminals 7 and 10. ► On the side of the device, connect the shield to the respective terminals. Do not connect it to the cabinet ground or any other ground points.