GE DS200DCFBG1BGB Cylinder pressure monitor

Secure the tray supply cable near the rack framework using multiple cable ties to minimize the chance of the connections being disturbed by casual contact with the wiring. Use at least four cable ties separated four inches apart with the first one located within six inches of the terminal block. Note This system will work with a positive grounded or negative grounded DC system. 20 8. Ensure that the circuit breaker is in the Off position. 9. Connect the DC wires to the circuit breaker. (Refer to ”Technical Specifications” on page 79 for power requirements.)

Power on the circuit breaker

Verify that the PWR LED on the front of the unit is green. If the PWR LED is OFF or the FAULT LED is solid yellow, refer to ”Troubleshooting” on page 75. The switch runs a series of self-diagnostic tests, which take a few seconds to perform. Once the self tests are complete, the switch is ready for normal network operations. Warning This unit might have more than one power cord. To reduce the risk of electric shock, disconnect all power cords before servicing the unit.

Do you want to know about our products?

We have a large amount of inventory and high quality, out of production control system components, DCS system accessories, robot system accessories, large servo system spare parts. PLC module, DCS module, CPU module, IO module, DO module, AI module, DI module, network communication module, Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output module, redundancy module, power module, relay output module, relay input module, processor module and other major brands.

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/