The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, machinery, electronics, automobile manufacturing, tobacco, plastics machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution and so on.

HIMA F8650X Control module

The LED indicators on the front of the operation and display panel are: • Inverter • Battery • Bypass • Programmable Outlet1 • Programmable Outlet2 • ECO Mode • Fault Figure 4.1 on the previous page shows the indicators’ locations. Their descriptions and functions are as follows.Pressing this button returns to the previous menu or aborts any change in the input data field before confirming. Up Pressing this button can move the cursor up or increase the value displayed in the input data field. When a menu is displayed on several screens, pressing the button can scroll up. Down Pressing this button can move the cursor down or decrease the value displayed in the input data field. When a menu is displayed on several screens, pressing the button can scroll down. Enter Pressing this button can enter the next level menu or confirm the parameter setting value.When the GXT4 is starting up, it initiates a self-test and displays the start-up screen about 10 seconds. After about 10 seconds, the LCD shows one of the "On" screens. The screen shown depends on whether or not input power is available. • When input power is available: TURN ON UPS. • When input power is not available: AC NOT AVAILABLE START ON BATTERY? To turn On the UPS, press the Up or Down button to select YES and press the Enter button. The UPS will start up, the LCD will display UPS STAR T IN G and then STAR T SUCCESSFUL after the UPS is turned On..

Default Screen

 Press any button in the START SUCCESSFUL screen to enter the default interface. NOTE: Values shown in the default screen will vary depending on installation and configuration. In the default screen, the LCD shows the UPS model, output parameters, input parameters, battery capacity with run time estimate and load percentage. The UPS operation mode (online/inverter, ECO, Battery or Bypass) will be indicated by the LED indicators. If no control button (ESC, Up, Down, Enter) is pressed for 2 minutes, the LCD will enter the screen-saver mode (back light turns off). It will remain off until a control button is pressed. 4.4.3 Main Menu Screen Press the Enter button in the default screen to enter the MAIN MENU screen. To select a submenu, press the Up or Down button to move the cursor to the required item, then press the Enter button to enter its submenu or set its parameter. Menu options STATUS Screen In the MAIN MENU screen, select STATUS to enter the Status Screen, displaying OUTPUT, LOAD, INPUT, BATTERY and TIME SINCE STARTUP. CONFIGURATION Screen Select MAIN MEN U > CO N FIGUR AT IO N to enter the Configuration menu In the CONFIGURATION screen, press the Up or Down button to move the cursor to the required item, then press the Enter button to enter a submenu or set its parameters. UPS Screen Select MAIN MEN U > CO N FIGUR AT IO N > UPS to enter the UPS screen. This menu has six screens. Press the Up or Down button to move the cursor to the required item, and press the Enter button to confirm the settings.