GEC ALSTHOM MVAA14B1AA0785C Logic control card

MEASUREMENT COMMANDS The RSTL is capable of measuring the output voltage and output current of the power supply. The optional A/D converter provides approximately 16-bit resolution. The readback message is returned as a measure of Voltage, Amperage or, for fastest operation, simply the hexadecimal output of the A/D converter. The length of the returned message is determined by the setting of the BACKTALK bit

The measurement commands are as follows:

 "Measure V" = "MV" = measure output voltage and return result in Volts format. "Measure V heX" = "MVX" = measure output voltage and return result in hex format. "Measure C" = "MC" = measure output current and return result in Amps format. “Measure C heX" = "MCX" = measure output current and return result in hex format. These commands may be explicitly spelled out in the command string sent to the RSTL controller, but only those letters that are capitalized are actually needed. The rest are ignored.

Do you want to know about our products?

We have a large amount of inventory and high quality, out of production control system components, DCS system accessories, robot system accessories, large servo system spare parts. PLC module, DCS module, CPU module, IO module, DO module, AI module, DI module, network communication module, Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output module, redundancy module, power module, relay output module, relay input module, processor module and other major brands.

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/