AREVA MVAJ21T1GB0771B Power module

Set the current output of the supply to zero using the "PC" command or equivalent. Send the command "TRCO". This will store the current readback offset value in the EEPROM for later use in readback calculations. CURRENT READBACK FULL SCALE: Set the current output to full scale using the "PC" command or equivalent. Send the command "TRCG". This will store the current read gain value in the EEPROM for later use in readback calculations. If the readback seems to be correct toward the full scale end but erroneous toward the zero end, then repeat the zero procedure. If the readback seems to be correct toward the zero end but erroneous toward the full scale end, then repeat the full scale procedure.

SERVICE PROCEDURES

The RSTL controller board is factory-installed; there are no user serviceable parts on it. Any operational difficulty with the board should be reported to Electronic Measurements Inc. The RSTL controller is shipped precalibrated from the factory; if it becomes necessary to recalibrate the operating parameters (Programming, Readback, etc.) this may be done by the user.

Do you want to know about our products?

We have a large amount of inventory and high quality, out of production control system components, DCS system accessories, robot system accessories, large servo system spare parts. PLC module, DCS module, CPU module, IO module, DO module, AI module, DI module, network communication module, Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output module, redundancy module, power module, relay output module, relay input module, processor module and other major brands.

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/