AREVA MVAJ23T1GB0774B Redundant channel module

Items needed for RSTL controller calibration: RSTL Controller installed in a power supply. 4 1/2 digit voltmeter. Calibrated external shunt (optional - internal shunt is very accurate). Shorting strap or other load capable of handling the full current of the power supply. Computer with IEEE-488 or RS232 port (see 4.8.3 for demonstration programs). INITIAL SETUP: Turn circuit breaker to OFF position. Disconnect AC power from the power supply. Connect IEEE or RS232 ports to computer or other IEEE-488 Controller. Connect the AC power source to the supply and the RSTL (the RSTL will now be powered up if it is a separate unit).

Turn the power supply's AC circuit 

breaker to the ON position. Establish communications between the computer and the RSTL. Turn the power supply's AC circuit breaker to the OFF position. VOLTAGE CHANNEL CALIBRATION: Either disconnect the load from the power supply (open circuit) or adjust it such that the supply will be able to put out its full voltage.Place meter across output terminals, observing proper polarity. Turn the circuit breaker to ON position. Send command "SR"

Do you want to know about our products?

We have a large amount of inventory and high quality, out of production control system components, DCS system accessories, robot system accessories, large servo system spare parts. PLC module, DCS module, CPU module, IO module, DO module, AI module, DI module, network communication module, Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output module, redundancy module, power module, relay output module, relay input module, processor module and other major brands.

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/