Home > Product > DCS control system > ABB 88FN02B-E Speed module

  • ABB 88FN02B-E Speed module
ABB 88FN02B-E Speed module

ABB 88FN02B-E Speed module

ABB 88FN02B-E Speed module

– Axial piston pump A10SO, variable, in swash plate design for hydrostatic transmissions in open loop circuit – Flow is proportional to drive speed and displacement. By adjusting the swash plate angle it is possible to infinitely vary the flow – Mounting flange acc. to SAE J744 – Flanged ports acc. to SAE J518 – 2 case drain ports – Good suction characteristics – Permissible working pressure 280 bar – Low noise level – Long service life – Axial and radial loading of drive shaft possible – High power to weight ratio – Wide range of controls –Short response times –Interchangeable with original Rexroth pump of the same model

Hydraulic Fluid In order to select the correct fluid

it is necessary to know the operating temperature in the tank (open circuit) in relation to the ambient temperature. The hydraulic fluid should be selected so that within the operating temperature range, the viscosity lies within the optimum range (νopt.); see shaded section of the selection diagram. We recommend that the higher viscosity grade is selected in each case. Example: at an ambient temperature of X°C the operating temperature in the tank is 60 °C. In the optimum viscosity range νopt (shaded area), this corresponds to viscosity grades VG 46 or VG 68, VG 68 should be selected. Important: The leakage oil temperature is influenced by pressure and speed and is typically higher than the tank temperature. However max. Temperature at any point in the system may not exceed 115 °C. Prior to project design, please see our data sheets RE 90220 (mineral oil) and RE 90221 (ecologically acceptable fluids) for detailed information on fluids and application conditions. When using ecologically acceptable fluids attention must be paid to possible limitations of the technical data.

                                    

[Main Products]

Main products: PLC and DCS system spare parts modules of world famous brands

①Allen-Bradley 17561746174717711785

②Schneider 140 Series PLC module

③General electric GE

IC693 IC697 IC698 Series PLC module

DS200 DS3800 DS215 IS200 IS215 IS220 Series gas turbine module

VMIVME Control module of series

④Bently3500 series cards 3500/22M3500/153500/92 And other products

⑤ICS TRIPLEX

⑥ABB Robots. FANUC RobotsYASKAWA RobotsKUKA RobotsMitsubishi RobotsOTC RobotsPanasonic RobotsMOTOMAN Robots 

EMERSONSpare parts for OVATION system, WDPF system and MAX1000 system.

⑧ Invensys Foxboro: I/A Series system, FBM (field input/output module) sequential control, ladder logic control, accident recall processing, digital analog conversion, input/output signal processing, data communication and processing, etc. Invensys Triconex: redundant fault-tolerant control system, Zui modern fault-tolerant controller based on triple module redundancy (TMR) structure.

Woodward505 series governor 9907-164 And other products

⑩Bosch RexrothIndramatI/O module,PLC CPU,Motors, drives and other products.

 ◆MotorolaMVME 162MVME 167MVME1772MVME177and other products.

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/

 

Obtain the latest price of ABB 88FN02B-E Speed module