OVATION 1B30023H01 Analog input board

Content introduction

Tests should not be performed during a thunderstorm. (f) Rubber gloves, boats, an insulated platform, etc., capable of protecting the operator against full-line voltage, are recommended for protection. (2) The completed grounding system shall be megger tested at each location where a maximum ground-resistance level is specified by the installation design documents, at service disconnect enclosure grounding terminal, and at ground test wells. Measure ground resistance not less than 2 full days after the last trace of precipitation, and without the soil being moistened by any means other than natural drainage or seepage and without chemical treatment or other artificial means of reducing natural ground resistance.

About our company

1.Advantages: supply of imported genuine products and professional off production accessories.

2.Main products: Focus on DCS, PLC, robot control system and large servo system. Various modules/cards, controllers, touch screens, servo drivers.

3.Main brands: BB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog, PROSOFT, etc

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/