ABB HIEE410110P2 Analog output module

For operation ensure that the signal levels of the channels are not so severely reduced or interrupted due to excessive contamination through dirt (→ Section 9.1). Clean the inside of the plastic frame of the device regularly with a damp soft cloth. Ensure that the surface is not scratched or scoured, especially when removing hard deposits and abrasive dusts. Do not expose the front of the device to solvents which may corrode and loosen the plastic frame (frame material: polymethylmethacrylate, PMMA).

FUNCTION AND CONTROL LEDS 

The GF-1 features 3 LEDs for the function control of the touch controller (TOUCH) and one LED for monitoring the system voltages (SUPPLY). These are arranged underneath the system slot 1 TOUCH DEF / DIRTY The LED is activated if during the power up function test of the Touch Screen the signal level of one or several IR channels goes below the minimum value (→ Section 9.2). A reduced signal level is caused by the contamination of the IR transparent plastic frame or the failure of an optical element. If this LED is lit, clean the plastic frame at the front of the device.

Company product range

----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------

PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module

Network communication module

Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output

Module, redundancy module, power module, relay output module, relay input module, processor module

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/