ABB HIEE410372P201 Thermocouple input module

This LED is lit if there are any communication problems between the touch controller and the system electronics. If the LED is lit intermittently or continuously, this indicates a system fault. During normal operation this LED is off. INIT / COM The LED stays dark when the power supply is switched on. It becomes active when the initialisation of the touch controller has been successfully completed by the system electronics. Pressing the Touch Screen will deactivate the LED for about 0.3 seconds. SUPPLY SUPPLY OK When lit, this LED indicates that the system voltages (+12V and +5V) are present. If the LED is not lit, although the supply voltage has been switched on, check the fuse

COMMUNICATION MODULES AND SYSTEM EXPANSION (SLOT 0, SLOT 1) 

The Micro Panel GF-1 provides two slots for communication modules and system expansions. The different communication modules available allow the Touch Screen to be connected to the automation system (e.g. PLC) or the field bus system required. The use of two communication modules allows two communication systems to be operative at the same time. Information on communication modules and protocols that are currently available can be obtained from your local Micro Panel dealer or from Micro Design Systems AG Technical Support.

Company product range

----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------

PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module

Network communication module

Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output

Module, redundancy module, power module, relay output module, relay input module, processor module

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/