ABB 5SHY55L4500 Digital input module

There are two probe inputs on the drive. This function stores signals from: • actual position values or • relative drive-internal time at the time the switching edge of this probe occurs. They are stored in the relevant parameters. By preselecting, it is fixed whether the positive or negative edge of the probe is evaluated. Each time the edge occurs, the difference between the measurand for the positive and that of the negative edge is stored in the parameter for the measurand difference.

Detect Marker Position Command 

With command P-0-0014, D500 Command determine marker position the correct detecting and the position of the reference marker of an incremental measuring system can be detected. The position of the marker is displayed in parameter S-0-0173, Marker position A. The command is also used to operate gantry axes with external measuring systems as well as to examine the error-free detection of reference markers.

Company product range

----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------

PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module

Network communication module

Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output

Module, redundancy module, power module, relay output module, relay input module, processor module

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/