ABB DSAB-02C Digital output module

Command S-0-0139, D700 Command Parking axis was used. Write access to this command is only possible in communications phase 2. If this command is activated, then all the monitoring activities of the command S-0-0128, C200 Communication phase 4 transition check are not conducted. Message "PA" appears on the 7-segment display. A phase regression deactivates this command (as is the case with all other commands).

Dynamic Programmable Limit Switch (PLS) 

With the function dynamic programmable limit switch, up to 8 positiondependent cams can be realized. The actual position value 1 can be used as reference signal (motor encoder) or that of 2 (optional encoder ). There is one on and one off threshold for each cam. If an off threshold is smaller than the on threshold, then the cam is inverted. There is also for each cam a separately programmable prehold time with which the reference signal can be corrected in terms of the velocty

Company product range

----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------

PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module

Network communication module

Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output

Module, redundancy module, power module, relay output module, relay input module, processor module

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/