ABB HIEE410409P104 Channel input module

Communication via SERCOS interface has been modified as follows: • if SERCOS communication is not active, there are no edges at the LWL inputs, then the drive goes into phase 4. The drive behaves like an analog unit (drive enable and drive halt via hardware inputs are possible). • SERCOS compliance class C • Multiplex channel for reading and writing data not needed in every cycle or dependent on the active mode. Individual elements of the list parameters can also be read/write. (Also see new function "Multiplex channel")

Position Block Mode 

The following modifications have been made here: • Mode"Run slow" is activated in bit 1 of parameter P-0-4060, Process block control word and no longer in P-0-4027, Function parameter. Jogging The parameters effectiving accel and jerk limit values are parameters • S-0-0260, Positioning Acceleration and • S-0-0193, Positioning Jerk Note: Activating "Run slow" no longer works in jogging mode. Only velocity in P-0-4030, Jog velocity is effective.

Company product range

----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------

PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module

Network communication module

Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output

Module, redundancy module, power module, relay output module, relay input module, processor module

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/