ABB PFSK138 PFSK 138 Channel input card
DIP switch selects internal resistor values (ON selects the resistor). Use these resistors only for the last unit (or for a single unit). If your application requires terminating resistors other than 120W, and/or bias resistors other than 681W, then make sure the internal DIP switches are set to OFF and connect your own external resistors.
Use series wiring if your application permits.
ZETA motors come from the factory with a permanently attached motor cable wired to the motor connector for series motor current. The O and R Series motors have flying leads or pigtails that you must wire to the motor connector yourself. The operating temperature of a motor connected in series will be lower than that of a motor connected in parallel. Typically, series connections work well in high torque/low speed applications
Company product range
----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------
PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module
Network communication module
Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output
Module, redundancy module, power module, relay output module, relay input module, processor module
This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/