ABB PPD103B03 Channel isolation card

Bear in mind that lengthening cables increases noise sensitivity. (The maximum length of cables is ultimately determined by the environment in which the equipment will be used.) If you lengthen the cables, follow the precautions below to minimize noise problems. • Use a minimum wire size of 22 AWG. • Use twisted pair shielded cables and connect the shield to a SHLD terminal on the ZETA6104. Leave the other end of the shield disconnected. • Do not route I/O signals in the same conduit or wiring trays as high-voltage AC wiring or motor cables.

Terminal Emulation for IBM/Compatibles 

To communicate with the ZETA6104, you will need a terminal emulation program. We recommend you use Motion Architect, a Windowsbased program that is provided in your ship kit. Motion Architect provides terminal emulation and program editor features as part of its ensemble of programming tools. Using Motion Architect: 1. To install, insert Disk 1 into your disk drive and run the Setup program (setup.exe). 2. After the Setup program is finished click on “Run Motion Architect”. 3. From the Product/Selection dialog box, select “ZETA6104” and click OK. 4. Click on “Terminal” from the main menu to run the terminal emulator.

Company product range

----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------

PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module

Network communication module

Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output

Module, redundancy module, power module, relay output module, relay input module, processor module

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/