ABB UFC092A V1 Pulse input card

Due to slight manufacturing variations, each motor has its own particular characteristics. In the procedure below, you will adjust three potentiometers (pots), to match your ZETA6104 to your specific motor. You will also select the best current waveform to use with your motor. If you purchased a ZETA6104 and ZETA motor system (not applicable to OS and RS motors), the ZETA6104 and the ZETA motor were matched to each other at the factory. However, you may still want to perform the matching procedure below, because your operating conditions may not be the same as factory conditions. The ZETA6104’s pots are located behind the removable metal cover on top of the chassis.

Before You Start 

• Note that if you replace the ZETA6104 unit or the motor, you will have to redo this procedure. • Set up a serial communication link and terminal emulator (see installation test on page 20). • Connect the motor to the ZETA6104. • Secure the motor in a location such that you can turn the pots and feel or hear the motor at the same time. (You should perform this procedure with the motor not coupled to the load, because the characteristics you are matching are those only of the drive/motor combination.) • Apply AC power when necessary to perform the steps below.

Company product range

----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------

PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module

Network communication module

Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output

Module, redundancy module, power module, relay output module, relay input module, processor module

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/