ABB UN0901D V1 HIER460279R1 Communication card

Run your motor at the resonant speed listed in the Offset Adjust column. Vary the speed slightly until you find the resonance point. To initiate motion, type these commands (followed by a carriage return) to the ZETA6104 from the terminal emulator: MC1 (This command makes the motion run continuously until you issue a !S command.) Vn (This command sets the velocity to n . For example, V4.66 sets the velocity to 4.66 rps.) GO (This command initiate motion.)

To stop the motor during this procedure

 issue the !S command. Re-issue the GO command to resume motion. Step 4 Adjust the Phase A Offset and Phase B Offset pots for minimum motor vibration and smoothest operation. Alternate between Phase A and Phase B to find the minimum vibration point. Step 5 Run your motor at the resonant speed listed in the Balance Adjust column. Vary the speed slightly until you find the resonance point. Step 6 Adjust the balance pot until you find the setting that provides minimum motor vibration and smoothest operation. Step 7 Repeat steps 3–6. Step 8 Run the motor at the resonant speed listed in the Waveform Adjust column. Vary the speed slightly until you find the resonance point.

Company product range

----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------

PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module

Network communication module

Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output

Module, redundancy module, power module, relay output module, relay input module, processor module

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/