The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, machinery, electronics, automobile manufacturing, tobacco, plastics machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution and so on.

IS220PDOAH1A Gas turbine module

Errors such as receive errors, messages with circulation count errors, etc., are maintained in internal counters just like the event counters. Refer to Table 3-6 for a listing of error counter address settings. Table 5-1 lists the error codes that appear on the INNIS01 module faceplate LEDs. INICT03 Computer Transfer The faceplate of the INICT03 module has the following features (Fig. 4-2): • Status LED. • 16 CPU LEDs. • Stop/reset pushbutton. Status LED The status LED is a two-color LED (red and green) that displays the operating status of the INICT03 module. It has three There are two groups of eight CPU LEDs. Group A LEDs display a moving pattern to indicate the module is functioning.commands and replies that pass through the INICT03 module. If an error occurs, these LEDs display an error code and the status LED turns red. Refer to Table 5-2 for a list of CPU LED error codes and associated corrective actions. Stop/Reset Push the stop/reset pushbutton once and wait for the status LED to turn red before removing an INICT03 module from the module mounting unit. Pressing the stop/reset pushbutton again causes the restoration of the INICT03 module to power up values after a halt. It is also used to recover from an operator-initiated stop or a module time-out.

Operating Modes

 The INICT03 module has two modes of operation: execute and error. Execute Execute mode is the normal mode of operation. In this mode, the host computer and Cnet network (or INFI-NET system) interact through the computer interface. The interface firmware permits the configuration of the computer interface and Harmony controllers from the host computer. Refer to the Function Code Applications Manual for more information. The INICT03 module, while in execute mode, can: • Collect exception reports. • Exercise control. • Allow the operator to adjust tunable module specifications. • Configure modules within a node residing on Cnet. • Perform routine system security functions. Error The INICT03 module enters error mode if the internal system diagnostic routines detect a hardware or execution error. If the module detects an error, the module halts and displays an error code on the CPU LEDs. Refer to Section 5 for corrective actions when the INICT03 module enters the error mode.