ABB 5730030-UN Channel relay module
The device is designed for mounting in control cabinets, control panels or control desks. 10.4" and 12.1" devices can be mounted horizontally or vertically, 15" devices must only be mounted horizontally. The following requirements must be fulfilled when selecting a suitable mounting position: The device should not be exposed to direct sunlight (Sunlight disturbs the infra-red touch sensor. In addition, when exposed to UV light, plastic parts of the device can embrittle and the lifespan of the device is reduced). If the device is to be used in potentially explosive atmospheres, the device must not be subjected to hazardous knocks. The operating elements on the service side of the device and the cable connections are accessible after the device has been mounted.
The ambient conditions stated must be observed. See Chapter 9.9 Ambient conditions
Sufficient ventilation (cooling) must be ensured by means of: Clearance of at least 3 cm to the ventilation slots Clearance of at least 15 cm from heat radiating components such as heavily loaded transformers The expected temperatures should be within the permissible range. See Chapter 9.9 Ambient conditions, 62. Properties of the mounting surfaces: Material thickness at the mounting cutout 2…5 mm
Flatness 0.5 mm (this requirement must also be fulfilled when the device is mounted!)
Surface roughness Rz 120
Our superior products
ABB -- AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHEO0 3HNA00 DSOC series
BENTLY --- 3500 system/proximitor, front and rear cards, sensors, power modules, probes, cables
Emerson -- modbus card, power panel, controller, power supply, base, power module, switch
EPRO --- Data acquisition module, probe, speed sensor, vibration sensor, shaft vibration transmitter, proximitor
FOXBORO - thermal resistance input/output module, power module, communication module, cable, controller, switch
GE --- module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA --- DI module, processor module, AI card, pulse encoder
Honeywell --- Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG - servo valve, controller, module, power module
NI --- Information acquisition card, PXI module, card, chassis multi-channel control card
WESTINGHOUSE --- RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward - Regulator, module, controller, governor
YOKOGAWA - Servo module, control cabinet node unit
This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/