The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, machinery, electronics, automobile manufacturing, tobacco, plastics machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution and so on.

HIMA Z7136 module

The INSOE01 Server Node consists of the INNIS11 Network Interface module, the INSEM01 Sequence of Events Master module, and the INTKM01 Time Keeper Master module. INSEM01 The INSEM01 Sequence of Events Master module communicates with the INNIS11 Network Interface module and the INTKM01 Time Keeper Master module. The INNIS11 module is the front end for all Cnet (control network) communication interfaces and is the intelligent link between a node and Cnet. The INSEM01 module communicates directly with the INNIS11 module. The INSEM01 module is responsible for managing the distributed sequence of events system, which includes managing: ■ 1,500 points coming from the SOE I/O modules in up to 1,000 Harmony control units (HCU). ■ 256 complex triggers with 16 operands each. ■ 3,000 simple triggers. The INSEM01 module is configured using the following function codes: ■ Executive block (FC 243). ■ Addressing interface definition (FC 244). ■ Input channel interface (FC 245). ■ Trigger definition (FC 246). The INSEM01 module monitors Harmony control units for data on an exception report basis, collects and sorts data it acquires, and provides SOE data to human system interfaces for report presentation after some predefined trigger condition occurs. Digital state transitions are collected at the HCU level by IMSED01 and INSET01 modules, then forwarded to the INSEM01 module. The INSEM01 module records the information and sorts it according to time in an internal database. When a trigger condition occurs, the human system interface is notified and data transfer occurs.

INTKM01 

The INTKM01 Time Keeper Master module provides time information to the INSEM01 module and to the rest of the distributed SOE system through the time synchronization link. The INTKM01 module connects to an external receiver using IRIG-B time code link. The module transmits absolute time to the rest of the system using the RS-485 time synchronization link. The INTKM01 module cable connects to an NTST01 termination unit. In this case, the termination unit provides the connection point for the external receiver signals and also the time synchronization link.

The IMSET01 Sequence of Events Timing module processes up to 16 digital field inputs, and receives and decodes the time synchronization link information sent by the INTKM01 module for a Harmony controller. The controller utilizes function code 241 (DSOE data interface) to interface SOE data from the IMSET01 module to the INSEM01 module, and function code 242 (SOE digital event interface) to configure and access the IMSET01 module input channels. Each channel is optically isolated, and can be individually programmed for 24 VDC, 48 VDC, 125 VDC, and 120 VAC input. The module communicates with its Harmony controller over I/O expander bus. Only one IMSET01 module can operate on an I/O expander bus segment. The module cable connects to NTST01 and NTDI01 termination units. The NTST01 unit provides for time synchronization link termination. The NTDI01 unit provides for field wiring termination.