EMERSON KJ1501X1-BC3 Automation control module

Content introduction

Any special fixtures required for access should be permanently attached to prevent loss. However, appropriate locks or other devices essential to safety, security, and physical protection of the hardware or of the area in which it is located may be used. (7) No part of the structure being protected should extend outside the protected zone. Where it is impractical to provide a common mast to provide protection for an entire structure, additional masts should be provided. If the pole is made of a non-conducting material, provide an air terminal extending not less than 0.6 meters (2 feet) nor more than 0.9 meters (3 feet) above the top of the pole. Connect the base of the mast (if metal) or the down conductors to the earth electrode subsystem of the protected structure with at least a No. 6 AWG copper conductor or equivalent.

About our company

1.Advantages: supply of imported genuine products and professional off production accessories.

2.Main products: Focus on DCS, PLC, robot control system and large servo system. Various modules/cards, controllers, touch screens, servo drivers.

3.Main brands: BB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog, PROSOFT, etc

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/