GE IS200TRTDH1B Timer module

Recalibration from a Known Source of Laser Power / Energy 1. From the main measurement screen select “menu” and select “calibrate”. Select “calibrate” Enter “Ad:" and select ”specific: this laser only”. 2. Enter “laser” and select the proper laser wavelength. Enter “average” and enter the desired averaging period.3. Enter “factor” and apply the known laser power/energy. 4. Enter the “modify “ screen and adjust the factor until the power/energy reading on the screen equals the known power/energy. Press “save” and the power/energy calibration factor under “updated” will change accordingly.

For units which have different calibration factors,

 CO2, YAG, or VIS, press "laser" to select correct type of laser before calibration. When recalibrating using " specific: this laser only“ function, only the calibration of the chosen laser wavelength will change. If you wish to change the calibration of all wavelengths proportionately, then use the function "overall: all lasers ".When changing power calibration, this will also change energy calibration proportionately. However, changing energy calibration will not change power calibration.

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/