GE IS200VAICH1B Matrix switch module

The type with the BF suffix has a broadband absorbing coating to provide high absorptivity from the UV through the IR. This coating can withstand energy densities, up to 0.8 J/cm² for short pulses and 2J/cm² for long pulses without changing calibration. The absorption of this coating is above 90% for most of its range, as shown in Graph 3 below. This coating is available for the PE50, PE25 and PE10 sensors. For even higher damage thresholds, there are the – DIF diffuser series with a diffuser in front of the absorber.

PD10 Series: 

Unlike the other sensors, the PD10 series sensors have a silicon or germanium photodiode with a neutral density filter mounted permanently in front of it. The filter detector combinations are calibrated over the entire wavelength range similarly to the PD300 power sensors and therefore the sensors have a high accuracy at any wavelength in the range. This is an exclusive feature with Ophir energy sensors.

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/