GE IS200VATFG1A Bus expansion module

The non-linearity is approximately 2%, and the error due to wavelength is given in table 3 above. In addition to the above errors, the reading of pyroelectric sensors changes with frequency. The sensor has a built in correction for this error. For frequencies above 50% of maximum frequency, inaccuracies in this correction can increase the total error by up to about 3%. The maximum error in measurement will be less than the sum of the above errors and in general will be considerably less

Recalibration from a Known Source of Laser Energy  

1. Set the instrument to “energy”. 2. Set to the proper energy range. 3. (For broadband type sensors only. See note 1). From the main screen enter “menu” and select “calibrate”. Enter and select “Adj:” . Select “specific: this laser only” if you only want to change the calibration of this wavelength or “overall: all lasers” if you want to change all wavelengths together proportionately.

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/