RELIANCE ELECTRIC S-D4007 Monitor Module

There are five connectors on the MMC analog module. Axis Connectors Each axis has its own 15 pin high density D connector. Each axis connector provides the following signal connections: 

• One 16-bit resolution analog output (±10 VDC) 

• One quadrature, incremental encoder input 

• Two DC outputs (24 VDC sink or source) 

• One DC input (24 VDC sink or source) 

• +24 VDC output

The metal shell of the 15-pin connector 

is tied to the chassis ground terminal on the MMC power connector. Cables provided by Giddings & Lewis will have the shield connected to the metal shell of the cable connector. If you use other cables, be sure to connect the shield to the metal shell of the connector.The DC outputs can be configured for either sink or source operation. When the DCOSS pin is tied to the +24V, the outputs will be in a source configuration. See Figure 12 below.

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/