GE IS200TRPGH1B Overspeed Tachometer Module

Follow the procedure below to replace the MMC battery when the "P" LED is flashing. 1. After DC power has been applied to the MMC for at least five minutes, turn off power. This ensures that the contents of memory will not be lost while the battery is removed. Disconnect the input power connector from the MMC. 2. Remove the MMC (including any optional modules) from the cabinet.

Use a static-free work surface if possible. 

Ground yourself using a properly grounded wrist strap before you open the case. These are standard precautions before handling any electronics component. 4. Lay the MMC system on the work surface. If there are no optional modules attached, remove the cover by removing the five screws , two on top, two on the bottom, and one on the right side of the MMC. If there are one or more optional modules attached, remove the four screws that attach the first optional module and remove the MMC from the optional modules.

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/