GE DS200TCDAH1BHD Embedded control card

2-axis PFM outputs and 2-axis PFM from base address $078200 (servo IC2). Assume DAC outputs on channels 1 and 2 and PFM outputs on channels 3 and 4. Jumpers E1A through E2D must be jumpered on Acc-24E2A option 1 only. For this type of system, make sure I7mn6 is set for DAC and PFM output mode.

ULTRALITE/MACRO STATION SETUP 

The Acc-24E2 family of JEXP accessories also can be used with MACRO Station to breakout the standard amplifier, flag, and encoder signals. The gate arrays on the Acc-24E2 family of accessories are located in the traditional channel 9-16 locations of the PMAC2 memory map. Note: In order for the MACRO Station to set up its output and input channels automatically, MACRO Station firmware 1.114 or greater must be used.

Brand display

 ABB、GE/FUANC、FOXBORO、TRICONEX 、BENTLY、A-B、EMERSON 、MOTOROLA、XYVOM、HONEYWELL 、REXROTH、KUKA、NI、DEIF、Yokogawa、WOODWARD、Reliance Electric、SCHNEIDER 、MOOG、PROSOFT、KOLLMORGEN、ICS TRIPLEX、HIMA

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/