ADEPT 10330-0400 Thyristor module
Terminal 33 functions as the control’s External Start/Unload contact input. When an external start command is given (a closed contact state) and all shutdown conditions have been cleared, the control will cycle through its configured start routine. If all shutdown conditions have not been cleared the unit will not begin to cycle through its start routine.
The turbine can also be re-started as the turbine is coasting down in speed.
There are two ways to start the turbine in this manner: 1. The first method: a. While the turbine is coasting down in speed, the Run / Stop contact must be closed to the Run position and the Start contact must be in the Start position. b. The Reset contact can then be toggled, to clear any shutdowns. c. The speed reference will start increasing, and the valve ramp will also start increasing at the specified ramp rates. d. When the speed reference matches the actual turbine speed, the speed PID will take control, and continue to ramp the speed up to the Rated Speed
Professional seller
Professional sales of major electrical brand products in the world
Overseas direct purchase of products, authentic inventory, price concessions
After sales warranty, complete models, same products, different prices and services
This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/