ADEPT 10332-10250 Gas Monitor Module

OVERSPEED TEST ENABLE When overspeed testing is performed, this contact is used. An overspeed test is allowed only under the condition that the remote speed setpoint function must be disabled and the turbine speed is within speed range. An overspeed test will allow the control’s speed setpoint to be increased above the normal maximum limit. When this contact is closed, the control detects overspeed and issues a trip. After overspeed testing ends, the contact should be opened.

SECOND DYNAMICS 

 If this option is enabled, the On-Line dynamic variables are available. With the contact open, Off-Line dynamic variables are active, and with the contact closed, then the On-Line dynamic variables are active.  MODBUS / SERVLINK SELECT This contact functions as the control’s Modbus communications enable contact input for the control’s 9-Pin Sub-D communication port. When this contact is open or is not used, the control’s communications port communicates using a Servlink\DDE protocol. This is used to communicate with Woodward’s Watch window program for unit configuration and/or service.

Professional seller

Professional sales of major electrical brand products in the world

Overseas direct purchase of products, authentic inventory, price concessions

After sales warranty, complete models, same products, different prices and services

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/