Kollmorgen LD5-302CA Channel output module

Initial Settings: Speed reference is set to 0%. Valve limiter is 0%. Actuator Output (Terminal 13-14) will be at 0 mA. Shutdown Relay (Terminal 41) will be Shutdown condition. The turbine should be stopped, the speed signal (Terminal 25-26) is minimum. Analog Input 1 and 2, Load sharing line and PT’s, CT’s are normal range based on their configurations.

Discrete Input- A (Terminal 31) 

should be set to the RUN (Closed) position to start and run the turbine, and Shutdown (Open) to shutdown the actuator output. Set the Modbus Controlled Shutdown from the Modbus controller to True to run the turbine, and to False to shutdown the, if used. 3. Reset all alarms and shutdown latches. Discrete Input- B (Terminal 32) should be toggled to reset all alarms and shutdown latches. This will affect the initial speed setpoint only after all trip conditions are cleared. The actuator or valve does not open by the reset input.

Professional seller

Professional sales of major electrical brand products in the world

Overseas direct purchase of products, authentic inventory, price concessions

After sales warranty, complete models, same products, different prices and services

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/