FOXBORO P0960JA-CP40 Analog output module

(b) On a freestanding (pedestal-only or stringerless) system, the pedestal base is glued or “shot” in place to form the basic understructure. The pedestal heads are leveled and the floor panel is installed. The conductivity between distant pedestals is variable and unreliable, making it unsuitable for a ground reference. (c) Bolted-grid (stringer) or rigid grid system raised floors are similar to the drop-in grid except the grids, when properly installed, are securely bolted or clamped in place.  with metal plate on both sides with a selected floor covering.

The drop-in panels must be metal or wood

They should be no larger than 24" x 24." Although the panels may not make a good low resistance contact with the stringers, the high distributed capacitance makes the floor appear to be an electrically continuous sheet at RF frequencies. The equipment cabinets shall be connected to the floor stringers by bonding straps which must be kept as short as possible.

About our company

1.Focus on DCS, PLC, robot control system and large servo system. Main products: various modules/cards, controllers, touch screens, servo drives.

2.Advantages: We supply imported genuine products, professional off production accessories, fast delivery and accurate delivery.

3.Main brands: ABB, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog, PROSOFT, etc

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/